Spindle drives for RWA-hardware systems
A specially slim power package
AUMÜLLER PL spindle drives are available in two versions, with forces of 600 N and 1000 N. Due to the slim drive housing with a diameter of only 36 mm and the specially short design, they are ideally suitable as window drives for the AUMÜLLER RWA hardware systems.
24V DC / 0,8 A
S1 – w/o cut-off switch - a cut-off switch must be provided externally (Control module USKm or locking drives FV3 / FVR3 / FVB3 / OFV)
|Pulling/Pushing force||600 N / 1000 N|
|Stroke||50 – 300 mm|
|Speed||2,6 / 5,8 mm/s|
|Housing (D x L)||36 mm, lenght depending on stroke|
|Opening mechanism||Stainless steel spindle and spindle tube, ball beared with end postion damping|
|Protection rating||IP 65|
|Certification||NSHEV compliant with EN 12101-2|
- Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
- Suitable for surface mounting
- Robust, corrosion-resistant design
- Universal brackets and casement brackets for all common profile systems
- Spindle tube with interior threat
- Various accessories for front and rear suspension
AUMÜLLER spindle drives can be used in SHEV systems and as well as for natural ventilation via automated windows, mainly in the roof area, but also in façades.
The window openers are installed surface mounted. The preferred installation locations are window frames (main closing edge or the side closing edge).
The area of application depends on the composition of the hardware system. The window drive is generally mounted using triangular brackets and casement brackets at an acute angle to the window profile. The effective drive force in the opening direction of the window depends on the angle of attack. Larger angles of attack are more favourable.