aumüller
ferralux®
Smoke and heat ventilation

aumüller ferralux®
Smoke and heat ventilation

PLS Spindle drives
Power packages for very heavy loads
AUMÜLLER PLS spindle drives exert forces of 1500 N – 5000 N, depending on the series, and are ideally suitable for the reliable opening and closing of heavy windows in roofs. The slim and compact drive housing, in a round 50 mm aluminium tube, integrates itself attractively into the roof construction.

Applications
The products
Rated voltage | 24V DC / 4 A – 13 A |
Cut-off switch | S3 – Load dependend cut-off switch with programmable motion monitored run (up to 300 mm stroke) |
Pulling/Pushing force | 1500 N – 5000 N (depending on series) |
Stroke | 50 – 1200 mm – (S12 version programmable) |
Speed | 4,0 – 17,0 mm/s – (S12 version programmable) |
Housing (D x L) | 50 / 60 mm, length depending on stroke |
Opening mechanism | Stainless steel spindle and spindle tube, ball beared with end position damping |
Protection rating | IP 54 |
Certification | NSHEV compliant with EN 12101-2 |
- Powerful heavy duty drives for loads up to 3500N
- Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours
- Suitable for surface mounting
- Robust, corrosion-resistant design
- Universal brackets and casement brackets for all common profile systems
- Various accessories for front and rear suspension
- Programmable parameters of external cut-off and control modules or synchronisation modules:
- Soft-start and soft-stop at the end positions
- Stroke length, closing force, speed
- Insert cards for external modules for feedback of end-positions “OPEN” or “CLOSED”
- Programmable parameters of intelligent S12 electronic cut-off switch:
- Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control
- Soft-start and soft-stop at the end positions
- Stroke length, closing force, speed
- M-COM for automatic configuration of synchronised run in multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2)
AUMÜLLER spindle drives can be used in SHEV systems and as well as for natural ventilation via automated windows, mainly in the roof areas. The window openers are installed surface mounted. The preferred installation locations are window frames (main closing edge or the side closing edge).
The application area includes outward-opening, large medium-heavy to heavyside-hung, bottom-hung, top-hung, friction hinged and parallel outward opening windows and skylights.
With the aid of external synchronisation modules, a synchronous mulit drive operation of up to 4 drives is possible.
Downloads
Technical Information
Brackets
PLSAccessories
PLS
Certificates
Environmental product declaration
EPD drives